Braefiddich Fencing

 

PORTABLE PANELS -

 

 

Panels are available in standard lengths of 4, 5, 6, 8, and 10 feet.  Standard height is 48 inches.

Custom panel lengths are available.

Each panel comes with two connecting pins.

Panels are available with 4x4 wire fill as a custom option at $1/linear foot.

 

 

 

 

WORKING GATES -

 

 

Working gates are available in 4, 5, 6 and 8 foot lengths.  Walk through height is 6 feet.  Gates open the full length to allow the maximum space for moving through large numbers of goats/sheep.  Gates close with the sliding latch rather than chains to allow easy operation with one hand.  Suitable for use in alleyways, with working equipment, holding pens, etc.

Each gate comes with two pins, or can be mounted on barn walls/doorways, etc with wall-mount hardware.

Custom lengths and versions available.

Available with 4x4 wire fill as a custom option for $1/foot.

 

 

 

 

KIDDING GATES -

 

Kidding gates are available in 4, 5 and 6 foot lengths.

Kidding/lambing pen gates come with a gate opening of 48     inches and a walk through height of 6 feet.  The smaller opening reduces necessary alley width and the amount of space for "escapees".  Balance of total width on 5 and 6 foot gates consists of an added panel on one side of the gate.  Gates close with the sliding latch rather than chains.

Each gate comes with two pins.

Available with 4x4 wire fill as a custom option for $1/foot.

 

                                                               

 

 

 

CLOSE UP OF GATE LATCH - 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

KIDDING/LAMBING PENS -

 

Kidding/lambing pens come in two styles, wall-mounted and freestanding. 

Gates and panels ordered as a pen package have pins and connectors included at no additional cost.

Available with 4x4 wire as a custom option for $1/linear foot.

WALL-MOUNTED PENS -

Wall Mount Starter Pen (includes 8 connecting pins and 4 wall connectors)

Wall Mount Add-on Pen (includes 8 connecting pins, 2 double-ended and 2 wall connectors)

FREESTANDING PENS -

       

Freestanding Starter Pen (includes 8 connector pins)

Freestanding Add-On Pen (includes 8 connector pins, 2 double-ended connectors)

 

 

GOAT/SHEEP CARRIER - 

Lightweight durable goat/sheep racks for your pickup or trailer.  Constructed with 4x4 welded wire panels.  Tie-downs are recommended for safety, but are not included.

Racks may be constructed in one solid enclosure, or may be made to disconnect into five separate pieces for easier storage.  It is easily assembled and just as sturdy.

 

 

The longbed pickup model, dimensions

7 1/2 feet by 4 feet,  weighs 110 pounds, very easy to load.  Racks are also available for shortbed trucks.  May be made for any size trailer.

Latches top and bottom.  Can be padlocked for added security.

 

The longbed model is now available with an

interior dividing gate.

 

   

 

LIVESTOCK SCALE AND PEN -  

 

700 pound capacity digital livestock scale.  Platform 38"x20"  Operates AC or DC.  Accurate to 0.1 lb.

Comes with lightweight (61 lb), durable surrounding pen with gate.  48"x30".

 

 

 

 

 

 

CREEP PEN/PUPPY PEN, NON-ADJUSTABLE - 

 

Creep panels are 48 inches in height and come in the width of any panel.

Creep panel openings, 8 inches by 10 inches, are rewelded for strength and durability.  All cut edges are then ground to remove any sharp edges, preventing injuries to kids/lambs.

Panels can be attached to regular panels/gates of any size, making either freestanding or wall-mounted units.

Creep panels can also by used in a puppy pen in your pasture or paddock for your Livestock Guardian Dog (LGD) puppy.  See our discussion on using the pen for our puppies on our farm page regardingstarting your pasture dog.

 

      

 

 

CREEP PANEL, ADJUSTABLE -

 

 

 

 

Braefiddich has a new creep panel available.  The panel is five feet wide, 48 inches tall. 

 

The lower part of the panel has adjustable vertical bars inserted into holes approximately two inches apart.  Bars are covered with pvc pipe.

 

A horizontal bar is available as an option.  The bar adjusts up or down to vary the height of the openings.

 

 

 

 

 

 

 

HAY RACKS/FEEDERS -

 

Hay feeders for your kidding pens, show pen or any use.  Made with solid exterior, filled with 4x4 wire.  Goats, sheep, miniature horses can easily eat from the openings. 

Feeders may be made any length.

Combination feeders are also available to allow feeding of grain and hay in your kidding or show pens.

 

 

 

 

 

 

ADDITIONAL PARTS AND PIECES -

 

For the most part when you order your kidding/lambing pens or other equipment, you will receive all of the hardware needed.  However, if you change your configurations you may need additional parts.

 

     

     

 

 

 

 

Pins for connecting panels

                                                                                                                     

    Double-ended connectors

    are available for $1 per set of

    2.

    For connecting 3 panels at

    one common point.  Doubles

    fit on the pin in-between the

    connectors attached to the

    panels/gates.

    The third panel (pen divider)

    pins to the empty hole

    (shown in the photo to the

    left)

    The ends of all three panels

    are securely attached with

    all panels seated on the

    ground.

 

                                                     

                                                      

Triple-end connectors

are available for $2 per

set of 2.

Triples connect up to 4

panels at one common

point.  Triples are

fastened into the

fencing much like

doubles.

The center hole pins with the first 2 panels,

leaving 2 empty holes to pin the next 2 at 90 degree angles.

 

            

 

 

WALL-MOUNT BRACKETS -

 

Wall connectors allow kidding/lambing     

pens to be securely fastened to barn                 

walls. The fastening plates have 4 holes,

2 vertical and 2 horizontal, to give you

options when screwing to the wall.  While

there are two sections of pipe, the one

closest to the wall is a spacer allowing the

panel to easily fasten at the second.  Wall

connectors are available for $5 per set of

2 and are included if buying a complete

kidding/lambing pen.

 

 

 

 

 

BACK TO FENCING